Accessories Segnetics Cables, cards, batteries, etc.

PNA Network Module
Designed for connection to Ethernet and Lonworks networks. The module is installed in a special slot on the controller housing. The network module allows you to organize system dispatching or data exchange between controllers.

Features of the PNA Ethernet network module:

• High speed operation.
• Collaboration of various protocols in one physical network – Ethernet.
• Several "Master" devices can work in one Ethernet network.
• Work with SCADA systems using an OPC server that supports Modbus-TCP.
• Communication with other controllers over an Ethernet network.
• Operation in the master ("master") or slave ("slave") mode of the network device.

---

PMM Memory Module
It is an additional non-volatile memory for SMH 2G or Pixel controllers.
Features of the PMM memory module:

• The memory capacity is 128 or 256 KB.
• The ability to copy, transfer, save and update the project on the controller using the memory module without the participation of a PC.
• Saving the system log.
• Two variants of the memory type: EEPROM with a standard resource of write cycles and FRAM with an increased resource for high-cycle operation.

---

Battery LBA-3.6-1000
A 1000 mAh lithium battery is designed to store the value of a real-time clock. It is available with a narrow connector (for PIXEL, SMH 2G, SMH 2Gi controllers) and with a wide connector (for SMH2010 controller). Its capacity is enough to operate the clock for 2.5 years with the controller power off.

---

Cables

KC-RS232-RJ12	Cable for communication of the SMH2010 controller (modification xxx3-xx-x) with a computer, RS232 interface, with DB9 and RJ12 connectors installed
KC-RS485-RJ12	Cable for communication of the SMH2010 controller (modification xxx2-xx-x) with a computer, RS485 interface, with an RJ12 connector installed
KC-RS232-RJ45	Cable for communication of the SMH-2G controller with a computer, RS232 interface, with DB9 and RJ45 connectors installed
MC-1.0	Cable for connecting the MS module to the SMH-2G/2Gi controller, length 1.0 meter
MC-2.0	Cable for connecting the MS module to the SMH-2G/2Gi controller, length 2.0 meters
CB-MR-0.5	Cable for connecting the MR module to the Pixel or SMH-2G/2Gi controller, 0.5 meters
CB-MR-1.5	Cable for connecting the MR module to the Pixel or SMH-2G/2Gi controller, 1.5 meters
CB-MR-2.0	Cable for connecting the MR module to the Pixel or SMH-2G/2Gi controller, 2.0 meters